310S / 310H

310S and 310H are high-temperature austenitic stainless steels with excellent oxidation resistance and strength at elevated temperatures. Both are based on the 310 grade, which contains high chromium (24–26%) and nickel (19–22%) for superior heat resistance.

  • 310S: Low carbon version (≤0.08%) for improved weldability and reduced risk of sensitization.
  • 310H: High carbon version (≥0.04%) for enhanced creep strength at high temperatures.

Corrosion resistance

Excellent resistance at normal temperatures and when in high temperature service exhibits good resistance to oxidation and carburizing atmospheres. Resists fuming nitric acid at room temperature and fused nitrates up to 800⁰F.

310S is preferred for welded structures; 310H for high-temperature creep strength.

Heat resistance

Good resistance to oxidation in intermittent service in air at temperatures up to 1900⁰F and 2100⁰F in continuous service. Good resistance to thermal fatigue and cyclic heating. Widely used where sulphur dioxide gas is encountered at elevated temperatures. Continuous use in 800 – 1575⁰F range not recommended but often performs well in temperatures fluctuating above and below this range.

Heat treatment

Annealing – heat to 1900 – 2100⁰F and cool rapidly for maximum corrosion resistance. This treatment is also recommended to restore ductility after each 1000 hours of service at 1200 – 1900⁰F.  

This grade cannot be hardened by heat treatment; strength achieved through cold work.

Welding

Good characteristics suited to all standard methods. Type 310H electrodes generally recommended for fusion welding. 

310S minimizes carbide precipitation during welding; 310H may require post-weld heat treatment for critical applications.
JCQ_slide_closeup

Typical applications

AISI analysis (%)

GradeCMnPSSiCrNi
310S.08 max2.0 max.045 max.030 max1.5 max24.0 to 26.019.0 to 22.0
310H.04-.102.0 max.045 max.030 max1.5 max24.0 to 26.019.0 to 22.0

Mechanical properties (annealed)

Yield Strength .2% Offset
(psi)
Ultimate Strength
(psi)
Elongation in 2”
(%)
Hardness
(Rb)
Hardness
(BHN)
Impact Charpy
(ft. – lbs)
Elastic modulus
(psi)
45,00095,000458517011029.0×10⁶

Other properties

Creep Strength 1%
Flow in 10,000 h
at 1,000⁰F psi
Magnetic
Permeability
at 200 H-Annealed
Electrical
Resistivity at 68⁰F
(μΩ-cm)
Thermal Expansion
32⁰ – 212⁰F
(In/In/⁰F×10‾⁶)
Thermal Conductivity
(BTU./ft.₂/hr./⁰F/ft)
17,5001.01788.08.0 (at 212⁰F)
10.8 (at 932⁰F)