317 / 317L
Grade 317 is a chromium-nickel-molybdenum austenitic stainless steel with a higher molybdenum content than 316, providing enhanced corrosion resistance, especially in aggressive chemical environments.
317L is the low-carbon version, designed to minimize carbide precipitation during welding, and is typically dual-certified with 317.
- 317: Superior corrosion resistance and higher strength, suited for severe chemical and corrosive environments.
- 317L: Lower carbon content improves weldability and resistance to sensitization, ideal for welded fabrications.
Corrosion resistance
317 offers excellent resistance to pitting and crevice corrosion, outperforming 316 due to its higher molybdenum content (~3–4%). It performs particularly well in chloride-rich environments, acidic solutions, and chemical processing applications. Highly resistant to phosphoric, sulfuric, and organic acids in moderate concentrations.
Heat resistance
Continuous service: up to ~925 °C (1700 °F). Intermittent service: up to ~870 °C (1600 °F). For prolonged service above ~425 °C, stabilized or high-carbon variants (when applicable) may be considered for improved performance.
Heat treatment
Annealing: 1900–2050 °F (1040–1120 °C) followed by rapid cooling. Cannot be hardened through heat treatment. Strength can be increased through cold working.
Welding
317L is preferred for welded structures due to low carbon content (<0.03%), reducing risk of carbide precipitation. Suitable for thicker sections (>6 mm). Typically, does not require post-weld annealing. Standard fillers (e.g., 317L) ensure good weld quality.
Typical applications
The list of applications for this general purpose grade is very extensive and includes:
- chemical processing equipment
- pulp and paper industry
- flue gas desulfurization systems
- food processing equipment
- pharmaceutical equipment
- heat exchangers and condensers
- marine structures
- acid handling systems
AISI analysis (%)
| Grade | C | Mn | P | S | Si | Cr | Ni |
|---|---|---|---|---|---|---|---|
| 317 | .08 max | 2.0 max | .045 max | .030 max | 1.0 max | 18.0 to 20.0 | 11.0 to 15.0 |
| 317L | .03 max | 2.0 max | .045 max | .030 max | 1.0 max | 18.0 to 20.0 | 11.0 to 15.0 |
Mechanical properties (annealed)
| Yield Strength .2% Offset (psi) | Ultimate Strength (psi) | Elongation in 2” (%) | Hardness (Rb) | Impact Charpy (ft. – lbs) | Elastic modulus (psi) |
|---|---|---|---|---|---|
| 30,000 | 75,000 – 80,000 | 40 | 85 | 25 | 28-29 × 10⁶ |
Other properties
| Creep Strength 1% Flow in 10,000 h at 1,000⁰F psi | Magnetic Permeability | Electrical Resistivity at 68⁰F (μΩ-cm) | Thermal Expansion 32⁰ – 212⁰F (In/In/⁰F×10‾⁶) | Thermal Conductivity (BTU./ft.₂/hr./⁰F/ft) |
|---|---|---|---|---|
| 18,000 | 1.01 | 30 | 9.0 – 9.6 | 8.0 – 9.5 (at 68⁰F) |
