Super Duplex 2507
Super Duplex 2507 is a high‑performance stainless steel designed for exceptional corrosion resistance and high mechanical strength. With approximately 25% Cr, 7% Ni, 4% Mo, and nitrogen, 2507 offers outstanding resistance to chloride pitting, crevice corrosion, and stress‑corrosion cracking. It maintains high strength across a wide temperature range but should not be used at prolonged temperatures above 570–600°F.
Standards & Designations
- UNS: S32750
- EN / W. Nr.: 1.4410 / X2CrNiMoN25‑7‑4
- NACE: ISO 15156 / MR0175 compliant
- ASTM/ASME: A240 (plate), A276 (bars), A479 (bars), A182 F53 (forged parts), A790 (pipes, tubes)
Corrosion resistance
Super Duplex Stainless Steel 2507 delivers outstanding corrosion resistance due to its high chromium, molybdenum, and nitrogen content, providing exceptional performance in both organic and inorganic acids, especially those containing chlorides. It offers superior resistance to pitting and crevice corrosion, supported by a PREN value around 42, significantly outperforming standard duplex and austenitic grades in aggressive chloride environments.
Heat treatment
- Full anneal: heat‑treated exclusively through solution annealing, which restores phase balance, removes detrimental intermetallics, and ensures optimal corrosion resistance and toughness.
- Process anneal: Super Duplex stainless steels do not use a traditional process‑anneal cycle like austenitic or ferritic grades. When cold deformation exceeds typical limits (around 10–20% depending on the reference), the material must be returned to the solution‑annealed condition to restore ductility and microstructural balance.
- Hardening: Super Duplex 2507 cannot be hardened by heat treatment.
Welding
- Machining: More challenging due to high strength; use rigid tooling, slower speeds, and carbide tools for best results.
- Forming: Requires higher forming forces; heavy cold work (>10–20%) requires solution annealing to restore ductility.
- Welding: Good weldability with controlled heat input; use E2594/ER2594 fillers and keep interpass temps below 300°F (149°C).
Typical applications
The list of applications for this general purpose grade is very extensive and includes:
- offshore platforms
- chemical processing equipment
- heat exchangers
- desalination
- pulp & paper digesters
- marine and seawater handling components
- high‑strength mechanical parts
- structural and industrial applications
Chemical Composition (%)
| Grade | C | Mn | Si | P | S | Cr | Ni | Mo | N |
|---|---|---|---|---|---|---|---|---|---|
| 2507 | .030 max | 1.20 max | .80 max | .035 max | .020 max | 24.0 to 26.0 | 6.0 to 8.0 | 3.0 to 5.0 | 0.24 to 0.35 |
Mechanical properties (annealed)
| Yield Strength .2% Offset (psi) | Ultimate Strength (psi) | Elongation in 2” (%) | Impact Charpy (ft. – lbs) | Elastic modulus (psi) |
|---|---|---|---|---|
| 80,000 | 116,000 | 15 | 74 | 29.0×10⁶ |
Other properties
| Density (lb/in³) | Melting Range | Electrical Resistivity at 68⁰F (μΩ-cm) | Thermal Expansion 32⁰ – 212⁰F (In/In/⁰F×10‾⁶) | Thermal Conductivity (BTU./ft.₂/hr./⁰F/ft) |
|---|---|---|---|---|
| 0.282 | 2570–2660°F | 0.80 | 7.2-7.8 | 8.6–10.4 (at 68-572⁰F) |
